|
| |
Breathing Air Compressor Service Program
Our Technicians are
certified in Bauer and Mako Compressors
Services Provided:
 |
Change Compressor Oil Every 6
Months |
|
|
Operate Compressor |
|
|
Check Pressure Levels in All
Stages |
|
|
Check for Loose Fittings and
Connections |
|
|
Check Filters |
|
|
Check Gauges and Connections |
|
|
Refill Liquid Filled Gauges if
Necessary |
|
|
Check Belt Drive Alignment |
|
|
Check All Electrical Connections |
For services listed above -
$115.00 plus an additional $60/hour travel time. Up to one (1) Gallon of regular oil
for the compressor is included in price. Any other parts, synthetic oil,
or filter would be at an additional cost.
Optional: Air Quality Test
Available @ $135.00 (Recommended once a year for normal use, twice a year for
heavy use)
After Service is provided, an
inspection report will be forwarded advising of any areas requiring attention.
Any item needing repair will be noted and an estimate to repair will follow.
To view and print a copy of the
Bauer Compressor Contract, click here.
Amkus
Service Program
Hydraulic
Power Unit:
Spreader:
|
|
Clean and inspect for excessive wear or damage |
|
|
Remove arms, clean and inspect pivot area, rack
and gear assembly |
|
|
Remove rack shield and straighten, if needed |
|
|
Lubricate rack, spreader arm gear and pivot pins |
|
|
Remove control valve, inspect and replace O-rings |
|
|
Remove manifold from cylinder, inspect
and replace O-rings |
|
|
Clean and inspect fittings, hoses, and quick
disconnects |
|
|
Check line hydraulic pressure |
Cutter:
|
|
Clean and inspect for excessive wear or damage |
|
|
Remove, clean and inspect center bolt, blades,
knuckle housing, friction plates, and cutter housing |
|
|
Check friction plate roll pins for proper
clearance and adjust |
|
|
Blades will be dressed per Amkus standards |
|
|
Reassemble cutter blade assembly using new snap
rings |
|
|
Remove control valve, inspect and replace O-rings |
|
|
Remove
manifold from cylinder, inspect and replace O-rings |
|
|
Clean and inspect fittings, hoses and quick
disconnects |
|
|
Check line hydraulic pressure |
Rams:
|
|
Clean and inspect for wear of damage |
|
|
Inspect
ram shaft for burrs or rust |
|
|
Inspect
ram head threads |
|
|
Inspect
top and bottom cap for leaks |
|
|
Inspect
top cap wiper seal for excessive leakage |
|
|
Inspect
and replace top and bottom manifold O-rings (old style Ram) |
|
|
Inspect
and replace control valve O-rings |
|
|
Inspect and clean fittings, hoses and quick
disconnects |
|
|
Check line hydraulic pressure |
Hydraulic Extension Hoses
and/or Hydraulic Reels
|
|
Clean and inspect for cuts and abrasions |
|
|
Pressure Test |
|
|
Inspect and clean hose fittings and quick disconnects |
|
